This post show you guide on how to use Autel IM608 key programmer
to add a blade new key for Toyota Auris 2007
Connect Autel IM608 Tablet to your car via OBD
Insert the working blade key into the key slot
Turn the key into position 1.
IMMO >> Accord >> Blade key >>Europe >>AURIS HV >>Blade key
System data initizlizing.please wait...
Then confirm vehicle profile,tab YES to continue
Tab IMMO Status scan
Turn the ignition on while Establishing vehicle communication
Communication status Tips
IF the tester can not communicate with the vehicle ECU:
Tab IMMO Status scan again
Establishing vehicle communication...
>> Add Key>> start
Step1 Master key verfication
Add key guide : insert the learned master key and turn the igition on press OK to contiue
Step2 Key programmming
Add key guide: Remove the key , insert the key to be learned into the iginiation lock (Just insert the key in the
off position and do not turn it to the on position!)wait for about 75s...
Add Key succeed !then Tab ESC
here has two master keys
Check the new blade, it works!Autel IM608 add Toyota Auris 2007 New Key succeed!