This is the Chrysler/Dodge/Jeep/Fiat/Alfa 12+8 OBDII cable adapter work for Autel MaxiSys Tools and Autel iIM508 / IM608
OBDII Cable Adapter for Autel Maxisys Chrysler/Dodge/Jeep/Fiat/Alfa 12+8
Autel Chrysler 12+8 Cable Description:
Since the Fiat Chrysler Group (FCA)-related models in 2018 or later are equipped with the Security Gateway Module (SGM/SGW), this module isolates most diagnostic requests for all post-market diagnostic devices except the original one through a powerful encryption algorithm. Such as clearing fault codes, motion tests, and ECU programming.
For FCA models in 2018 or later, non-original equipment can only be used to read fault codes, vehicle VIN identification, and view data streams through the OBD diagnostics station.
In response to this problem, the isolation of the SGM/SGW can now be bypassed by the FCA 12+8 dedicated conversion diagnostic connector.
Autel FCA 12+8 cable Function：
1. Use with Autel MaxiSYS scanner to diagnose on Chrysler Jeep Renegade Wrangler 300C after the 2018 year
2. OBDII Cable Adapter
3. Perform Active Tests
4. Enables Read and Clear Codes
5. Access Chrysler / Fiat Vehicles Using Secure Gateway Module
3. View Generic & Manufacturer Live Data
4. Perform TPMS OBDII Relearn
6. ADAS calibrations (Requires Maxisys ADAS Software)
Autel 12+8 Cable Using Tips
The Cable Adapter can be used with Autel Maxisys series scanners, such as MS906, MS906BT, MS906TS, MS908, MS908S, MS908S PRO, Maxisys Elite, etc. Also IM508, IM608
1.Locate and unplug the 12pin and 8PIN connectors of the SGW module.
2.Then connect the FCA 12+8 directly to the 12pin and 8pin (two connectors connected to the SGW) connector on the car.
3.At this point, normal communication with the car can be achieved.
Expect to see this message when scanning a Chrysler with the Security Gateway Module:
DEVICE UNABLE TO COMMUNICATE WITH THE CONTROL UNIT
Placement of the SGM varies, but it is often located in the sidekick panel, passenger side near the glove box, or behind the radio.
YOU MUST USE THE APPROPRIATE CONVERTER. NO RETURNS WILL BE ACCEPTED FOR DAMAGE CAUSED BY USING THE WRONG POWER TYPE.
Necessary for Vehicles:
- Required to access 20% of 2017 for Chrysler and for fiat vehicles
- Required to access 50% of 2018 for Chrysler and for fiat vehicles
- Required to access 80% of 2019 for Chrysler and for fiat vehicles
- Required to access 100% of 2020 for Chrysler and for fiat vehicles
2018+ Jeep Renegade
2018+ Jeep Compass
2018+ Jeep Cherokee
2018+ Jeep Wrangler
2018+ Jeep Grand Cherokee
2018+ Dodge Ram
2018+ Dodge Durango
2018+ Dodge Journey
2018+ Dodge Charger
2018+ Dodge Challenger
2018+ Chrysler Pacifica
2018+ Chrysler 300
1pc x FCA 12+8 Universal Adapter